Видео

Thanks I appreciate it I changed my distributor and I forgot to put the engine on tdc 0 . But your video helped me to drive again my 5.0

Bro doing this at night is a such a power move. He knows he can figure it out without leaving his door compromised throughout the night… electric.

Good job man!

I have a 2011 Toyota Corolla with 175,000 miles. Trans fluid was never changed and it’s dark. After watching this video I feel better about doing a drain and fill. I bought the Toyota OEM fluid. I will report back after a couple months to let you know how it goes. 😊

LMAOOO bro first u got robbed from the dealer for their prices and double fisted to not even include those cheap ass metal brackets... Come on now ur better then that. Great video though just wish ppl dont get scammed by these dealers.

I run this in all mower and atv tires wether they have a problem or not

Im terrified to change my fluid. I dont slam it and drive like an ass so it hasnt had any issues. But I do know it was changed twice before 100k. Now currently has 234k. How did it go?

Hello, im beeing watching some videos to figure out, is the procedure the same on civic than the acurs rsx base to replace those oarts?? Thank you.

𝙏𝙝𝙖𝙩 𝙙𝙞𝙨𝙖𝙨𝙩𝙚𝙧 𝙬𝙖𝙨 𝙠𝙠𝙞𝙣𝙙𝙖 𝙘𝙤𝙤𝙡 😮

Good video, no music, straight to the point. Subbed.

Why are we doing all this when we have pedestal mound rocker arms??? All you need to do is bolt them down to 19 lb and you're done.

If you take air cleaner off and do a 100% choke meaning all air block start when it turn fast let the air in no air no compression.

Great video thank you

I have the same problem but if i do that fix like the next time i start it dies it still start

You just made it simple

Thank you!

This hack worked awesome! Used this on Ford Fusion and it didn’t take me long to remove all caps.

I tried this, and the engine backfired and my sparkplug tip literally exploded inside the cylinder. What the heck happened?

So, I've not tried this yet, I was actually in the middle of removing the engine, 17.5 hp 500cc b&s on a troy bilt pony. Was looking up videos on removing/repairing it when I ran across your video. Now considering putting the carb and everything else back on and try this temporary band aid. Question tho.... the last time I ran it, it suddenly revved up then began surging. I finished the lawn then ordered new carburetor, plug, filters, and got some sea-foam for the fuel. Replaced all that, went to start it, and wham! Wouldn't turn over. Pulled the plug and it spun no problem, also there wasn't any fuel coming out when I removed it, so I don't think it's an issue with fuel and must be compression, but that's just a guess because I really don't know much about these engines. My question is, given the symptoms I mentioned prior to parking it to repair, and the engine locking up, also when I turn it with plug out when it reaches compression it sounds like a horn softly honking coming from the breather tube, is that normal? Anyway, given all that, anyone have an idea what it could be? The root cause, problem. Thank you, anyone, for any insight

😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

07 Si owner that just did this. Not an easy task. You don't need to move the alternator at all to loosen the compressor bolts so long as you have swivel socket tips, and the long nose snap pliers are a must. Seriously. Get someone to help you hold the compressor/keep it twisted so you can work on it because we have a lot less clearance than the other civics. Used the OEM shim and new snap rings. $40 clutch kit and 5 or so hours. That all being said, if you can get a shop to just vacuum the system and take out the compressor to replace the clutch for cheap, go that route because they can easily have it done in half the time that way. Fantastic video thank you!

NICE!!!!! Now I can just screw the air chuck in the preventer. If it makes it leak after a few years, 15 buck repair. They say dont pump air through the backflow but I am lol

Hello I hope u are this but what type of grease did u use??

do black rim srar h easily? nice video bro

wow. best video yet!!!!!

Thank you for the reply

Gotta be an easy way for this

Allstate Mayhem Commercial, hahaha+

Thank you! I'm not a handy man by any stretch but wanted to save some money doing this myself. Your video did just that!🙂

thank you, Sir! thanks to your video, we were able to easily fix ours!

This was a pain to replace

My friends Murano, hit the brakes and it's a ton of vibration, the rotors are only 18 months old, but I know they are toast. Should we go with Rock Auto replacement, or carbon fiber from Rock Auto or go OEM ? (130+, 206+, 400 for parts,r espectively). Anything I recommend will be an improvement, but whoever did the last job, she only got 18 months from it.

Thanks to you and this video I was able to repair the leak and didn't even have to buy anything. Just went and made sure all the parts were installed correctly which they were not. THANK YOU!

Thank you for the very helpful video!

Thank you for taking the time to make this video! I replaced mine today, after watching your video! Thanks a lot. Now I need to know how to fix my door lock on the back door it keeps sliding down when I open the door. If you try to shut the door it hits the medal bar on the frame. I have to slide it up every time before I shut the door.

I had one of the bolt covers slip while trying to remove. Tried different size sockets but nothing fit. Had all these visions of all day trying screw drivers, chisels, drills, hammers ETC. 5min with a hole saw and done deal. Man, you were a life saver! Thanks, simple and easy and it worked.

Why does every simple job on every other vehicle have to be brain surgery on the Murano…

And what to use when putting them back? What is the strong adhesive to use ?

im sorry but how do u expect the suction to stick with it not being wet?

This video has me crying! That clip just doesn’t slide back it🤬

Gas hose on the valve stem and then into the drill. Works a million times better than anything.

Good video but I wouldn't put it in tires that have tire pressure sensors in it. It will ruin it

Totally doing this, I was just going to screw the bases to a board

Lug nut caps are honestly the dumbest thing ever.

Thank you; great job my friend

you accomplished nothing as the problem still exists!. the valve tappets are out of adjustment

Glad to see this video. I have a 2008 with around 160k miles on it. I did a drain and fill today. Old stuff wasn't as bad as yours, but wasn't pink either. Figured if I do it once now, I never have to mess with it again. Although I may just start doing it every 50k. Hopefully I get 270k+ like you.

Thank you so much for this video!!! I was able to repair all 3 of my sink stoppers in my house.

Thank you! Saved me some $600 in parts and labor. I did have to buy an extra part beyond the ones in the kit you shared (my poppet assembly was a mess), but they are also way cheaper than a whole new valve, and the plumber to do the pipe work.

Thank you for this video. It was straight to the point and it absolutely solved my problem.. 🎉🎉